Temperature and Humidity Transmitter RHT-P10 and RHT-XS

Home » Products » Sensing, Conditioning & Transmitters » Humidity & Temperature » Temperature And Humidity Transmitter Rht-p10 And Rht-xs

01 - ISO 900102 - Reach Compliance03 - RoHS11 - Ensured Accuracy

RHT-P10 and RHT-XS


Temperature and Humidity Transmitter

The RHT-P10 and RHT-XS transmitter series incorporate the best high accuracy and great stability relative humidity and temperature sensors. They convert the measured values into linear 4 to 20 mA signals. The microprocessor based circuit enables full configuration of output range when used with the TxConfig PC interface and the Windows® based software.

 

RHT-P10 model is aimed at humidity and temperature monitoring in pressurized or vacuum systems. Sensor probe in Stainless Steel can be thread mounted in the supplied flange* or directly to the system wall or pipe.

 

RHT-XS is aimed at humidity and temperature monitoring in non-pressurized systems that require a remote sensor.

 

*The flange is not attached to the transmitter and must be purchased separately.



Still, unsure? Ask an expert! Make a Suggestion See all models

- Humidity measurement
  Measuring range: Configurable between 0 and 100 % RH or -100 and 103 °C for dew point;
  Response time (1/e (63 %)): 8 seconds @ 25 °C (is slow moving air 1 m/s).
- Temperature measurement
  Total accuracy: Configurable between -40 and 120 °C;
  Response time (1/e (63 %)): up to 30 s (is slow moving air 1 m/s).
- Power supply
  12 Vdc to 30 Vdc
- Outputs
  4-20 mA or 20-4 mA current, 2-wire loop power supply.
- Output Load (RL)
  RL (Ohms max.) = (Vdc - 12) / 0.02 let: Vdc= Power supply in Volts.
- OUT1 output resolution: 0.006 mA.
- OUT2 output resolution: 0.022 mA.
- Isolation between loops
  The 4-20 mA outputs are isolated from each other.
- Provides protection against power supply polarity inversion
  Yes
- Protection
  Electronic circuit case: IP65;
  Sensors capsule: IP40.
- Cable entrance 
  Compress fitting PG7.
- Electronic circuit 
  Electronic circuit (RHT-P10): -10 to +65 °C, 0 to 95 % RH.

  Electronic circuit (RHT-XS): -10 to +65 °C, 0 to 95 % RH.

 

 

 


        

Related News

Share: