N3000 Big Digit Universal Process Contoller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes. With a sophisticated and consistent software and its advanced truly universal circuitry, the N3000 accepts configuration of both input signal and control output through the front keyboard without any internal hardware change. Power supply for remote loop powered transmitters is standard and is a must for high-end applications. From the very simple applications as a temperature controller to the most complex systems of distributed control with PLC or SCADA networks, the N3000 is the right answer to your needs for industrial or laboratory automation.
Double LED display: red for PV (18 mm) and green for SV (13 mm)
Accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc
Sampling rate: 4 measurements per second
Measured value resolution: 12,000 levels
One digital input for dry contact with 5 programmable functions
Remote setpoint input for 4-20 mAdc signal
Dual SPST 3 A / 250 Vac relays and dual SPDT 5 A / 250 Vac relays can be individually programmed for control or alarm
Isolated 4-20 mA output with 1500-level resolution, maximum 550 ohm load for control or PV/SV retransmission. It can also be configured for digital input or output (10 Vdc / 20 mA)
Auto tuning PID control. Auto/Manual mode, bumpless transfer
Programmable Soft start up to 9999 seconds
Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments
