IoT energy meter Telik Trafo

Home » Products » Data Acquisition & Communication » Iot Devices » Iot Energy Meter Telik Trafo

01 - ISO 900102 - Reach Compliance03 - RoHS04 - Anatel05 - FCC06 - CE11 - Ensured Accuracy

Telik Trafo


IoT energy meter

Telik Trafo is a device that directly measures the low voltage output of distribution transformers and sends the collected data to monitoring systems. It is intended for energy balance, allowing continuous monitoring and remote monitoring of consumption data.
 
The data obtained from Telik Trafo monitoring allows electricity distribution system operators to make more agile decisions and carry out a series of analyses. It has the MQTT protocol for publishing data in addition to the Wi-Fi module for configuration and communication with industrial networks.
 
This product communicates with the mobile network via LTE NB-IoT and LTE Cat-M1 frequencies. Telik Trafo is a compact device with native wireless communication, which makes it easy to install and deploy in the field.



Still, unsure? Ask an expert! Make a Suggestion See all models

- Input channels
   3 voltage input channels referenced to neutral
   Range: 85 Vac to 285 Vac (phase-neutral) | 0 Vac to 493 Vac (phase-to-phase)
   3 current input channels (indirect measurement using the Rogowski Coil)
   Range: 2 A to 1,000 A
   Insulation category of Cat-III/600 Vac measurement sensors
- Resolution
   Voltage channels: 0.01 Volts
   Current channels: 0.01 Amps
- Nominal frequency 50 Hz/60 Hz
- Measured and calculated variables
   Direct Voltage 3Ø (V)
   Indirect Current 3Ø (A)
   Frequency (Hz)
   Power: Active 3Ø (kW) | Reactive 3Ø (kVAr) | Apparent 3Ø (kVA)
   Power factor 3Ø and total
   Energy: Total direct and reverse active (kWh) | Total direct and reverse capacitive reactive (kVAh) | Total direct and reverse inductive reactive (kVAh)
- Internal measurements
   Internal temperature
   External power supply status
- Memory capacity: 13,000 records (45 days of recording at 5 min intervals)
- Recording interval: 5 minutes

   Recording mode Circular memory
- Anti-tamper system Yes, it has an anti-tamper key that sends a notification and blocks the records if the box is tampered with.
- Communication interfaces

   Cellular module (LTE Cat M1, NB IoT, 2G) to publish data to the cloud
   Wi-Fi for local data collection and configuration
- Software
   Integrable with cloud systems
   Web page available via Wi-Fi interface for local data collection and configuration
- Power supply
   Automatic phase-neutral power supply via one of the voltage measurement channels
   Range: 85 Vac to 285 Vac
   Consumption: Less than 10 W
- Power backup Internal/automatic auxiliary source for last gasp (sending the last publication when a power outage occurs)
- Operating temperature Using power supply: -10 to 60 °C
- Storage temperature: -40 to 85 °C
- Polycarbonate housing (flame-retardant V0 and anti-UVA/UVB material)
- Protection index: IP65
- Dimensions: 202 x 143 x 85 mm