Articles and Technical Notes

» » Articles And Technical Notes

Technical Notes

Registers

Novus Controllers - controllers selection guide Wide range of industrial process controllers, such as temperature control, humidity, pressure, flow, and other electrically measurable variables, through ON-OFF or PID algorithms with auto tuning.		Date: 7/16/2019 url: http://www.novus.com.br/downloads/?ID=538473		Selecione a Opção Desejada Save (PDF - 0.75 Mb)
Pressure measurement and metrology The pressure measurement procedure is widely widespread within industrial processes and the reliability of these measurements is related with trade, quality, health and safety issues. In this way, a wrong measurement can create problems in the quality of the industrial process and even fatal accidents. In this article, you will find some definitions and the importance of metrology within the industry.		Date: 7/9/2019 url: http://www.novus.com.br/downloads/?ID=817194		Selecione a Opção Desejada Save (PDF - 0.94 Mb)
Myths and Facts about Cloud Systems Cloud computing technologies are already a consolidated reality in the market. However, many people stilleep prejudice in order to embrace this technology in business world, despite using it in a daily basis in their private life. The purpose of this article is to elucidate facts and myths about this technology and to facilitate the decision whether or not to deploy cloud oversight systems in your company.		Date: 6/17/2019 url: http://www.novus.com.br/downloads/?ID=627491		Selecione a Opção Desejada Save (PDF - 1.03 Mb)
Modbus TCP and its Client-Server model and MQTT and its Publish-Subscribe model The Modbus TCP protocol has been used for years in automation applications. However, with the advent of concepts such as Industry 4.0, IoT and wireless devices, new necessities - that make difficult to use the Client-Server model – have arrived. What are the possible alternatives? Written by our Project Coordinator Fabio Coelho de Souza, this article brings us some ideas.		Date: 6/2/2019 url: http://www.novus.com.br/downloads/?ID=919072		Selecione a Opção Desejada Save (PDF - 0.86 Mb)
The HART Communication Protocol Communication with machinery and control and measuring instruments is the basis of industrial automation. The simplest, most robust and oldest communication technique implemented is a current loop with a normal range of 4 mA to 20 mA. However, the obvious disadvantage is that a single loop allows only one-way communication from a sensor to an actuator. Developed in the mid-1980s, the HART ™ (Highway Addressable Remote Transducer) protocol allows two-way communication of additional information - in addition to the normal process variables - between intelligent field devices.		Date: 3/28/2019 url: http://www.novus.com.br/downloads/?ID=604427		Selecione a Opção Desejada Save (PDF - 0.77 Mb)
Approval of calibration certificates and Permissible Error Limits - a process approach It is not uncommon to find in the Quality or the Instrumentation environment those who are concerned with the calibration certificate or with a calibration certificate that is expiring on a certain date, always focusing on to be approved on some evaluation or audit. But does the calibration certificate alone guarantee the reliability of the process?		Date: 3/13/2019 url: http://www.novus.com.br/downloads/?ID=615381		Selecione a Opção Desejada Save (PDF - 0.54 Mb)
Modbus TCP and its Client-Server model and MQTT and its Publish-Subscribe model The Modbus TCP protocol has been used for years in automation applications. However, with the advent of concepts such as Industry 4.0, IoT and wireless devices, new necessities - that make difficult to use the Client-Server model – have arrived. What are the possible alternatives? Written by our Project Coordinator Fabio Coelho de Souza, this article brings us some ideas.		Date: 2/6/2019 url: http://www.novus.com.br/downloads/?ID=071646		Selecione a Opção Desejada Save (PDF - 0.86 Mb)
Efficient and secure industrial remote access using AirGate-3G router and VPN infrastructure Remote access to electronics and machines around the globe is gaining importance quickly - both in industry and other areas related to it. Experts point out that remote control and monitoring are some of the most important mechanisms for increasing productivity and reducing costs, raising the interest of companies to implement them. The need for information about industrial machines is of the utmost importance so that company managers can become aware of the current scenario of their factory and take action quickly. The ability to use the Internet to access the installed machines greatly reduces maintenance costs, optimizing the monitoring processes and eliminating the need for large displacements to verify problems, allowing control of remote industrial plants without any frontiers.		Date: 5/4/2018 url: http://www.novus.com.br/downloads/?ID=927277		Selecione a Opção Desejada Save (PDF - 0.36 Mb)
Remote Monitoring in Photovoltaic Solar Generation A photovoltaic solar generation facility is intended to generate electric power from photovoltaic cells. The correct design sizing shall assure the supply of 100% of the power demanded by the installation where the plant will be implemented, so that the electricity bill of the prosumer (consumer-generator) is reduced next to zero, allowing maximum return on the investment. To achieve this goal, limitations such as the physical space and climate conditions need to be observed to assure maximum efficiency of the application.		Date: 10/16/2017 url: http://www.novus.com.br/downloads/?ID=632200		Selecione a Opção Desejada Save (PDF - 0.29 Mb)
Temperature measurement applications using temperature transmitters Temperature is one of the most common parameters measured across the industry. It is essential to measure, control and monitor temperature to ensure quality, safety and correct operation on various processes. Different variables have to be considered when developing a temperature measurement system such as non-linearity, accuracy and stability to ensure a reliable temperature measurement. Variables like maintenance and wiring costs must be taken into account to make the system as cost-effective as possible.		Date: 5/17/2017 url: http://www.novus.com.br/downloads/?ID=832808		Selecione a Opção Desejada Save (PDF - 0.43 Mb)
Programming business rules in the cloud! NOVUS Cloud is an IoT (Internet of Things) platform that broadens the horizons of data management and presentation. Applied in conjunction with other NOVUS products, this platform stores, analyzes and displays temperature, humidity, pressure, location and other measurements on the Internet.		Date: 4/11/2017 url: http://www.novus.com.br/downloads/?ID=743828		Selecione a Opção Desejada Save (PDF - 0.48 Mb)
Send data periodically to an FTP Server The objective of this tutorial is to show how to set up the AirGate-3G to periodically send data to an FTP server. This will allow users to back up data, such as temperature measurements, in a remote location.		Date: 12/1/2016 url: http://www.novus.com.br/downloads/?ID=718090		Selecione a Opção Desejada Save (PDF - 1.28 Mb)
Sending SMS messages with the AirGate-3G The industrial gateway with NOVUS 3G network connection, the AirGate-3G, has an SMS notification feature, a function that can aid the user to supervise the communication link of the equipment, the occurrence of power outages and to configure custom alarm messages.		Date: 10/4/2016 url: http://www.novus.com.br/downloads/?ID=718235		Selecione a Opção Desejada Save (PDF - 0.35 Mb)
NConfig Cool Features The main objective of the NConfig software was to make easy the setup of NOVUS Indicators and Controllers families. Therefore, there are few other cool features that you should be aware of in order to explore all the software potential and even save more time during your start-ups.		Date: 9/9/2016 url: http://www.novus.com.br/downloads/?ID=394918		Selecione a Opção Desejada Save (PDF - 0.31 Mb)
Keeping The Shop Floor Data Available Anywhere These days there is an enormous amount of information contained within the process controllers of an industrial environment. It is not always easy to provide this information directly and efficiently to the management level or to the decision makers. With this need in mind we are incorporating a range of "push-services" in the XL Family of controllers in order to facilitate this conversation between the shop floor and the management level.		Date: 8/4/2016 url: http://www.novus.com.br/downloads/?ID=910923		Selecione a Opção Desejada Save (PDF - 0.20 Mb)

1
2
3
4
>>

Compartilhar:

NOVUS Global Privacy Notice

NOVUS is committed to protect the privacy and security of your personal information. The data that you share with NOVUS allows us to provide a better experience when you use our products and services. We guarantee total privacy to your data, used exclusively for communications between NOVUS and you.

In this statement we affirm:

NOVUS does not sell or negotiate customer information;
Your data are stored in secure and controlled environment;
We use your data only for communications of your interest;
At any time you may opt out of the list;

Please see our complete Privacy Policy

After read our Privacy Policy, chose the option bellow: