LogBox-RHT-LCD - Micro Data Logger for Temperature and Humidity

» » » » Logbox-rht-lcd - Micro Data Logger For Temperature And Humidity
  • Visualizar imagens do produto LogBox-RHT-LCD

LogBox-RHT-LCD is dual channel data loggers with built-in temperature and relative humidity sensors. They use a high quality industrial grade humidity sensor for accurate and reliable operation in applications such as transportation, food and goods storage, process auditing, pharmaceutical, HVAC and others.

They can be easily programmed and set via a handy infrared IR-LINK 3 interface connected to a USB port under Windows® software or with a PalmOS compatible PDA IrDA interface. LogChart II software allows for logger configuration, recorded data retrieval, plotting, historical analysis and it exports data to spread sheets. In the LogBox-RHT-LCD the temperature and humidity values are shown in the digital display. You can also check on the display the Minimum and maximum recorded values.

- Temperature measurement

  Range: -40 to 80 °C. Resolution: 0.1°C

  Response time:up to 30 s in fairly still air

- Humidity measurement

  RH Range: 0 to 100 %RH. Resolution: 0.1 %RH

  Dew point range: -40° to 100 °C. Resolution 0.1 °C

  Response time: 8 s in fairly still air, from 20 to 80 %RH

- Memory for 32,000 recordings in one channel or 16,000 recordings for each channel

- Recording interval: programmable from 1 s to 18 hours

- Logger start: immediately, outset by the device’s button, by date/hour or by a programmed setpoint

- Logger stop: at full memory; at some specified date and hour, number of samples or never (circular memory)

- Infrared communication range: 50 cm, 30° angle

- Internal replaceable lithium cell (3.6V ½ AA) weekly

- Estimated battery life: up to 200 days with one weekly download and 5 minutes measuring interval. Battery life depends heavily on data retrieval frequency

- NXperience software operation environment: Configurator software for Windows ® 10, 8, 7 and XP

- LogChart II software operation environment: Configurator software for Windows ® 7, Vista, XP, 2000, NT and 98

- Operating temperature: -40 °C to 70 °C

- Enclosure: IP65 (electronics), IP40 (sensor probe), flame retardant, ABS+PC

- Dimensions: 70 x 60 x 35 mm

  • 8813003005

    LogBox-RHT-LCD Temp. and humidity data Logger w/ LDC display

  • Downloads


Flyer LogBox-RHT and LogBox-RHT-LCD

Download - Flyer LogBox-RHT and LogBox-RHT-LCD

Selecione a Opção Desejada


(PDF - 0.78 Mb)


Operating Manual LogBox-RHT-LCD

Download - Operating Manual LogBox-RHT-LCD

Selecione a Opção Desejada


(PDF - 2.89 Mb)


Optional RHT measuring tips

Download - Optional RHT measuring tips

Selecione a Opção Desejada


(PDF - 0.33 Mb)


LogChart II Installer - V2.6.8.00 (8/31/16)

This software is used for LogBox-RHT-LCD, LogBox-RHT, LogBox-DA, LogBox-AA, TagTemp data loggers, N120DL, TagTemp-USB and TagTemp Stick.

Download - LogChart II Installer - V2.6.8.00 (8/31/16)

Selecione a Opção Desejada


(ZIP - 5.73 Mb)


NXperience Installer V2.0.8.10 (9/16/2020)

This software is used for TagTemp-NFC, TagTemp-NFC-LCD, LogBox-BLE, LogBox-3G, LogBox Wi-Fi, RHT Climate, TagTemp Stick, TagTemp USB, DigiRail Connect, DigiRail NXprog, LogBox-RHT-LCD and Pressure Transmitter NP785.

Download - NXperience Installer V2.0.8.10 (9/16/2020)

Selecione a Opção Desejada


(ZIP - 17.42 Mb)


CE - D.O.C. LogBox-RHT-LCD

CE Declaration of conformidity

Download - CE - D.O.C. LogBox-RHT-LCD

Selecione a Opção Desejada


(PDF - 0.14 Mb)


IR-Link 3 Driver (02/11/2010)

USB driver for the IrLink3 interface. Usage instructions: Unpack all files to a temporary folder, plug the IrLInk3 interface in a USB port. The Windows New Hardware Wizard will ask for a driver. Select the manual installation option and enter the path to the unpacked files. Follow the Wizard instructions to finish installation.

Download - IR-Link 3 Driver (02/11/2010)

Selecione a Opção Desejada


(ZIP - 1.07 Mb)

Related News

  • Article: For each problem, a solution: the right choice for monitoring my process


    It is very difficult to find processes that are not being monitored electronically nowadays. Whether to avoid human error, to meet regulatory requirements or even to reduce costs, the vast majority of companies have already dropped outdated clipboard notes and adopted data logging and monitoring equipment. In order to help choosing the most appropriate device to each process, this article discuss the characteristics of different electronic equipment for monitoring.


NOVUS Global Privacy Notice

NOVUS is committed to protect the privacy and security of your personal information. The data that you share with NOVUS allows us to provide a better experience when you use our products and services. We guarantee total privacy to your data, used exclusively for communications between NOVUS and you.

In this statement we affirm:

  1. NOVUS does not sell or negotiate customer information;
  2. Your data are stored in secure and controlled environment;
  3. We use your data only for communications of your interest;
  4. At any time you may opt out of the list;

Please see our complete Privacy Policy

After read our Privacy Policy, chose the option bellow: