DigiRail Connect - Ethernet I/O Module

- Inputs:
  RAMIX: 4 digital and 2 analog (isolated)
  DMIX: 8 digital

- Outputs:
  RAMIX: 3 digital or 2 relay and 2 analog (isolated)
  DMIX: 4 relays or 8 digital

- Analog signals:
  Thermocouples J, K, T, N, E, R, S and B
  Pt100, Pt1000, NTC,
  0-60 mV, 0-5 V, 0-10 V, 0-20 mA, 4-20 mA

- Analog input impedance:
  0-60 mV, Pt100, Pt1000, NTC and thermocouples: >10 MΩ
  0-5 V, 0-10 V: >1 MΩ
  4-20 mA: 15 Ω + (1 V @ 20 mA)

- Digital Input characteristics:
  Logical level "0": < 0.5 V
  Logical level "1": > 3 V
  Maximum voltage: 30 V
  Input impedance:270 kΩ
  Input current: @ 30 Vdc (typical) 0.15 mA
  Maximum frequency (square wave):
  Dry contact: 10 Hz
  PNP: 250 Hz
  NPN: 250 kHz

- Digital Output characteristics:
  Maximum load current: 500 mA
  Short circuit current: 200 mA
  Maximum switching voltage: 30 Vdc
  Minimum switching voltage: 6 Vdc

- Relay Output characteristics:
  Type: SPST-NO and SPDT
  Maximum load current: 3 A (SPST) / 6 A (SPDT)
  Switching voltage: 250 Vac
  Suitable for resistive loads

- Analog Output characteristics:
  Signal types: 0-20 mA, 4-20 mA, 0-10 V
  Maximum load: 0-20 / 4-20 mA: ≤ 500 Ω
  0-10 V: ≥ 2000 Ω

- Analog Channel resolution:
  Analog inputs: 16 bits (65000 levels)
  Analog outputs: 12 bits

- Communication interface:
  USB
  CAN
  Ethernet: 10/100 Mb/s, IEEE standard 802.3u
  RS485

- Software:
  NXperience (via USB)

- Power Supply:
  Voltage: 10 Vdc to 36 Vdc
  Maximum Consumption: 5 W
  Typical Consumption: 20 mA

- Operating conditions:
  Temperature: -20 to 60°C ( -4 to 140°F)
  Humidity: 5 to 95% RH, non-condensing

- Enclosure: ABS+PC

• 8811611440

  DigiRail Connect (RAMIX 2AI / 2AO / 4DI / 2RL ETH)

• 8811611420

  DigiRail Connect (RAMIX 2AI / 2AO / 4DI / 3DO ETH)

• 8811612440

  DigiRail Connect (DMIX 8ED / 4RL ETH)

• 8811612420

  DigiRail Connect (DMIX 8ED / 8SD ETH)