DigiRail - Modbus IO Modules

» » » » Digirail - Modbus Io Modules
Conflict Mineral Free

DigiRail


Modbus IO Modules

The DigiRail line of smart transmitters with Modbus RTU comunication interface provide a simple way for integrating analog or digital signals to supervisory systems. Featuring up to two universal input analog signal channels they are the most economical way to deliver analog inputs to PLC´s and SCADA systems. The input signals are isolated from power thus protecting the electrical instruments by eliminating ground loop effects. This reduces substantially the undesirable interferences and instabilities in sensor measurements.



Still, unsure? Ask an expert! Make a Suggestion See all models

- Analog inputs: programmable for thermocouples (J, K, T, E, N, R, S, B), Pt100, mV, V, mA
- Cold junction compensation for thermocouples and compensation for Pt100 3-wire cables
- Open loop detection for thermocouples, Pt100 and mV
- Sampling rate for 1 analog input: 10Hz for mV, V and mA. 5 Hz for t thermocouples and Pt100<
- Analog input resolution: 17 bits
- Digital inputs: in voltage, 4 to 35 V to activate. Internally limited current in 5 mA
- Digital outputs: 8 A / 250 Vac SPDT relay, resistive load
- Power: 10 to 35 Vdc, 50 mA maximum current 2-wire RS485 communication with Modbus RTU protocol       

- Configurable address and baud rate (1,200 to 115,200bps)
- LED indicators for communication and status
- Key for resetting communication parameters to original factory default
- Accuracy (at 25 °C): Pt100, mV, V and mA: ±0.15 % of full scale. Thermocouples: ±0.25 % of full scale
- Temperature effect: 0.003 % of full scale/°C
- Cold junction compensation for thermocouples: 1 °C at 25 °C. ±0.05 °C / °C
- Isolation: 1000 Vac from inputs (analog or digital) and power or communication
- Windows based configurator software (free download)
- Dimentions: 72 x 78 x 19 mm
- Mounting: 35 mm DIN rail
- Working temperature: 0 to 70 °C


        
        
        
        
11/21/2005

Flyer DigiRail

Download - Flyer DigiRail

Selecione a Opção Desejada

Save

(PDF - 1.09 Mb)

8/23/2018

Operating Manual DigiRail-2A

Download - Operating Manual DigiRail-2A

Selecione a Opção Desejada

Save

(PDF - 0.11 Mb)

6/29/2017

Communication Manual DigiRail-2A

Download - Communication Manual DigiRail-2A

Selecione a Opção Desejada

Save

(PDF - 0.07 Mb)

8/23/2018

Operating Manual DigiRail-2R

Download - Operating Manual DigiRail-2R

Selecione a Opção Desejada

Save

(PDF - 0.72 Mb)

6/29/2017

Communication Manual DigiRail-2R

Download - Communication Manual DigiRail-2R

Selecione a Opção Desejada

Save

(PDF - 0.06 Mb)

8/23/2018

Operating Manual DigiRail-4C

Download - Operating Manual DigiRail-4C

Selecione a Opção Desejada

Save

(PDF - 0.10 Mb)

1/7/2019

Communication Manual DigiRail-4C

Download - Communication Manual DigiRail-4C

Selecione a Opção Desejada

Save

(PDF - 0.65 Mb)

9/30/2010

CE - D.O.C. DigiRail-4C

CE Declaration of Conformity

Download - CE - D.O.C. DigiRail-4C

Selecione a Opção Desejada

Save

(PDF - 0.04 Mb)

9/30/2010

CE - D.O.C. DigiRail-2R

CE Declaration of Conformity

Download - CE - D.O.C. DigiRail-2R

Selecione a Opção Desejada

Save

(PDF - 0.02 Mb)

9/30/2010

CE - D.O.C. DigiRail-2A

CE Declaratio of Conformity

Download - CE - D.O.C. DigiRail-2A

Selecione a Opção Desejada

Save

(PDF - 0.05 Mb)

  • SuperView Mobile - SCADA Application for Mobile Supervision

    SuperView Mobile is a SCADA (Supervisory Control And Data Acquisition) system developed for users who want to monitor, control and supervise devices in their industrial, commercial or residential plant using Android Smartphones and Tablets. This mobile system provides an easy interface use for advanced users and beginners, in addition to providing a configuration wizard that guides the user to develop a complete application.

     

    Remote communication is carried out using the Modbus TCP protocol over the communication interf...

  • DigiConfig - Software to configure transmitters and gateways

    DigiConfig is an easy-to-use software for parameterizing and diagnosing transmitters and gateways with a Modbus RTU serial interface, so that they can later be connected to any supervisory or control system.

     

    The devices are physically connected to the computer via an RS485 network. For this connection, you can use a USB cable, an RS232-RS485 converter or a USB-RS485 converter. The communication protocol used between the computer and equipment is Modbus RTU.

    ...

  • 8811100001

    DigiRail-2A Dual univ. analog Input Module RS485 ModBus out

  • 8811200101

    DigiRail-2R RS485 Dual relay outputs

  • 8811400101

    DigiRail-4C RS485 Four counters/digital inputs

Share:

NOVUS Global Privacy Notice

NOVUS is committed to protect the privacy and security of your personal information. The data that you share with NOVUS allows us to provide a better experience when you use our products and services. We guarantee total privacy to your data, used exclusively for communications between NOVUS and you.

In this statement we affirm:

  1. NOVUS does not sell or negotiate customer information;
  2. Your data are stored in secure and controlled environment;
  3. We use your data only for communications of your interest;
  4. At any time you may opt out of the list;

Please see our complete Privacy Policy

After read our Privacy Policy, chose the option bellow: