Gateway DigiGate Profibus

Home » Products » Data Acquisition & Communication » Gateways And Converters » Gateway Digigate Profibus

Conflict Mineral FreeISO 9001Reach ComplainceRoHS

DigiGate Profibus


Gateway

DigiGate Profibus is the ideal equipment for interconnecting a Profibus DP network with a Modbus RTU network. It works as a gateway, operating as a master station in the Modbus network and as a slave station in the Profibus network.

 

Thus, according to its previous configuration, DigiGate will read the data of the other devices (slaves) of the Modbus network and send the read values to the Profibus master. In the same way, it will write at the output of the Modbus slaves according to the Profibus master requests, providing a complete control of the Modbus network devices through the Profibus network.


The device is totally configurable through the application DigiConfig for Windows®, which comes with the product, making access and change of its parameters really easy.



Still, unsure? Ask an expert! Make a Suggestion See all models

Profibus:

- Protocol: Profibus DP

- Operates at the entire range of communication rates, from 9600 bps to 12 Mbps

- Addressing range: 0 to 125

- Automatic detection of supported baud rate “GSD” file included

- Termination and polarization resistors included (activated by jumper)

- Profibus connection: DB9 connector
Modbus:

- Operates from 1200 bps to 115200 bps

- Termination and polarization resistors included (activated by jumper)

- Commands available for data reading: “01 Read Coil Status”, “02 Read Input - Status”, “03 Read - Holding Register” and “04 Read Input Register”

- Commands available for data writing: “05 Force Single Coil”, “06 Preset Single Register”, “15 Force - Multiple Coils” and “16 Preset Multiple Registers”

- Protection at the bus: ±60 Vdc, 15 kV ESD

General:

- Operating environment: 0 to 50 °C, 30 to 80% of relative humidity, without condensation

- Mounting: DIN 35 mm rail

- Electrical insulation between the Profibus interface and the rest of the device: 1000 Vac

- Power supply: 10 a 35 Vdc. Internal protection against inverse polarity

- Frontal lit indicators for communication and status


     

        
        
        
11/27/2017

Flyer DigiGate Profibus

Flyer DigiGate Profibus

Download - Flyer DigiGate Profibus

Selecione a Opção Desejada

Save

(PDF - 0.61 Mb)

6/12/2018

Operating Manual DigiGate Profibus

Download - Operating Manual DigiGate Profibus

Selecione a Opção Desejada

Save

(PDF - 2.33 Mb)

5/20/2021

GSD File

Download - GSD File

Selecione a Opção Desejada

Save

(ZIP - 0.00 Mb)

  • DigiConfig - Software to configure transmitters and gateways

    DigiConfig is an easy-to-use software for parameterizing and diagnosing transmitters and gateways with a Modbus RTU serial interface, so that they can later be connected to any supervisory or control system.

     

    The devices are physically connected to the computer via an RS485 network. For this connection, you can use a USB cable, an RS232-RS485 converter or a USB-RS485 converter. The communication protocol used between the computer and equipment is Modbus RTU.

    ...

    1/25/2021 - DigiConfig Configurator V1.8.3.02 (7/23/2019)

11/27/2017

Flyer DigiGate Profibus

Flyer DigiGate Profibus

Download - Flyer DigiGate Profibus

Selecione a Opção Desejada

Save

(PDF - 0.61 Mb)

6/12/2018

Operating Manual DigiGate Profibus

Download - Operating Manual DigiGate Profibus

Selecione a Opção Desejada

Save

(PDF - 2.33 Mb)

5/20/2021

GSD File

Download - GSD File

Selecione a Opção Desejada

Save

(ZIP - 0.00 Mb)

  • 8816011210

    DigiGate Profibus (Gateway Profibus DP / Modbus RTU)

Related News

  • 8/3/2021

    DigiGate Profibus - Modbus to Profibus Protocol Converter

    DigiGate Profibus is a useful corverter that reads Modbus data and translates it into Profibus protocol. Its parameters are easily configured through the DigiConfig application. DigiGate can read and convert data from slave devices on the Modbus network, providing efficient control of your Profibus network.

  • 4/9/2019

    Ceramic tile company decreases gas consumption by almost 50% modernizing kilns

    A Brazilian ceramic tile company intended to deactivate two smaller kilns and reduce its gas consumption, whose bill was close to U$ 100,000 per month. The N2000s, a PID controller specifically designed for actuation of servomotor valves, has emerged as the ideal solution to the problem.

  • 7/14/2018

    Get to know DigiGate: the most cost-effective Profibus-Modbus gateway on the market

    The DigiGate Profibus is a gateway for connecting a Profibus DP network and a Modbus RTU network. It is a cost-effective solution on the market to search factory floor data, generally used by instruments in Modbus networks, for the level of control in Profibus DP. The gateway treats the networks separately, because they are different speeds, functioning as a master in the Modbus network and slave in the Profibus network.

Related Products

Share: