N2000 - Universal Controller

» » » » N2000 - Universal Controller
CEConflict Mineral FreeISO 9001Reach ComplainceRoHSUL

N2000


Universal Controller

The N2000 Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.With a sophisticated and consistent software and its advanced truly universal circuitry, the N2000 accepts configuration of both input signal and control output through the front keyboard without any internal hardware change.


Power supply for remote loop powered transmitters is standard and is a must for high-end applications.
From the very simple applications as a temperature controller to the most complex systems of distributed control with PLC’s or SCADA networks, the N2000 is the right answer to your needs for industrial or laboratory automation.
The N2000S is specific for applications in controlling servo motorized valves, servo actuators and dampers by means of two time proportional relays.

 



Still, unsure? Ask an expert! Make a Suggestion See all models

- Accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc
- Double LED display: red for PV and green for SV
- Dual SPST 3 A / 250 Vac relays and dual SPDT 5 A / 250 Vac relays can be individually programmed for control or alarm
- Isolated 4-20 mA output with 1500-level resolution, maximum 550 ohm load for control or PV / SV retransmission.

  It can also be configured for digital input or output (10 Vdc / 20 mA)
- Sampling rate: 4 measurements per second
- One digital input for dry contact with 5 programmable functions
- Remote setpoint input for 4-20 mAdc signal (N2000)
- 24 Vdc / 30 mA supply output for remote transmitter excitation
- RS485 comm with Modbus RTU protocol (optional)
- Auto tuning PID control
- Auto/Manual mode, bumpless transfer
- Programmable Soft start up to 9999 seconds
- Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments
- Measured value resolution: 12,000 levels
- Control output update: 250 ms
- Up to four configurable relays, two timer alarms
- Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event
- Alarm initial blocking function
- Power: 100 to 240 Vac/dc, 50/60 Hz; optional 24 Vdc/ac
- Maximum consumption: 4 VA
- Circuitry can be removed from the front panel
- Operating environment: 0 to 55 ºC, 20 to 90 % RH
- Front panel: IP65, Polycarbonate UL94 V-2
- Enclosure: IP20
- Back panel: IP20, ABS + PC UL94 V-0
- Dim ensions: 48 x 96 x 92 mm, 1/8 DIN
- Panel cutout: 45.5 x 93 mm
- Weight: 240 g (265 g with options)


        
        
1/5/2006

Universal Process Controller N2000 & N2000S - Flyer

Read more about the Universal Process Controller N2000 & N2000S

Download - Universal Process Controller N2000 & N2000S - Flyer

Selecione a Opção Desejada

Save

(PDF - 0.11 Mb)

5/14/2021

Operating Manual N2000 (USB)

Download - Operating Manual N2000 (USB)

Selecione a Opção Desejada

Save

(PDF - 0.62 Mb)

3/25/2020

N1100, N2000 and N3000 Registers Table for MODBUS communication

Download - N1100, N2000 and N3000 Registers Table for MODBUS communication

Selecione a Opção Desejada

Save

(PDF - 0.18 Mb)

11/8/2003

MODBUS Protocol Documentation

Download - MODBUS Protocol Documentation

Selecione a Opção Desejada

Save

(PDF - 0.18 Mb)

7/12/2005

CE - D.O.C. N2000 & N2000S

CE Declaration of Conformidity.

Download - CE - D.O.C. N2000 & N2000S

Selecione a Opção Desejada

Save

(PDF - 0.05 Mb)

7/21/2014

2D Housing Drawing - N2000

Download - 2D Housing Drawing - N2000

Selecione a Opção Desejada

Save

(ZIP - 0.40 Mb)

6/4/2020

Controllers selection guide

Wide range of industrial process controllers, such as temperature control, humidity, pressure, flow, and other electrically measurable variables, through ON-OFF or PID algorithms with auto tuning.

Download - Controllers selection guide

Selecione a Opção Desejada

Save

(PDF - 0.99 Mb)

  • QuickTune - Configuration Software to controllers and indicators

    QuickTune is a free software tool for parameter configuration of NOVUS controllers and indicators. With its clean interface, any lay or advanced user can friendly access and modify all device functions for proper configuration. Designed for easy and quick commissioning, it provides diagnosis and monitoring resources to field technicians. More than a software, QuickTune is a tool. Furthermore, QuickTune offers the main features to meet most users and profile needs in the industry.

    ...

    7/23/2021 - QuickTune Configurator V1.0.6.00

  • SuperView - Process Supervision Software SCADA

    SuperView is a Supervisory Control and Data Acquisition software (SCADA) that brings to the user a visual development model to create applications. Besides communication with Modbus RTU and Modbus TCP devices, also is posible to use SuperView stations operating in Client or Server modes allowing distributed supervision of a process or system.


    The user can use different kinds of resources that simplify the configuration, bringing flexibility to take decisions when developing the synoptic. Customized access policies for...

  • SuperView Mobile - SCADA Application for Mobile Supervision

    SuperView Mobile is a SCADA (Supervisory Control And Data Acquisition) system developed for users who want to monitor, control and supervise devices in their industrial, commercial or residential plant using Android Smartphones and Tablets. This mobile system provides an easy interface use for advanced users and beginners, in addition to providing a configuration wizard that guides the user to develop a complete application.

     

    Remote communication is carried out using the Modbus TCP protocol over the communication interf...

  • FieldChart - Supervisory and Data Acquisition Software

    FieldChart is a software used for monitor and register data acquired from NOVUS products. It generates real time trends and data lists that can be exported in usable formats like a spread sheet. There are two versions available: FieldChart-Lite and FieldChart-64C.

     

     

    The FieldChart-Lite can register 8 simultaneous channels and it is available for free.

     

     

    The FieldC...

    7/30/2021 - FieldChart-Lite V2.0.3.06

1/5/2006

Universal Process Controller N2000 & N2000S - Flyer

Read more about the Universal Process Controller N2000 & N2000S

Download - Universal Process Controller N2000 & N2000S - Flyer

Selecione a Opção Desejada

Save

(PDF - 0.11 Mb)

5/14/2021

Operating Manual N2000 (USB)

Download - Operating Manual N2000 (USB)

Selecione a Opção Desejada

Save

(PDF - 0.62 Mb)

3/25/2020

N1100, N2000 and N3000 Registers Table for MODBUS communication

Download - N1100, N2000 and N3000 Registers Table for MODBUS communication

Selecione a Opção Desejada

Save

(PDF - 0.18 Mb)

11/8/2003

MODBUS Protocol Documentation

Download - MODBUS Protocol Documentation

Selecione a Opção Desejada

Save

(PDF - 0.18 Mb)

7/12/2005

CE - D.O.C. N2000 & N2000S

CE Declaration of Conformidity.

Download - CE - D.O.C. N2000 & N2000S

Selecione a Opção Desejada

Save

(PDF - 0.05 Mb)

7/21/2014

2D Housing Drawing - N2000

Download - 2D Housing Drawing - N2000

Selecione a Opção Desejada

Save

(ZIP - 0.40 Mb)

6/4/2020

Controllers selection guide

Wide range of industrial process controllers, such as temperature control, humidity, pressure, flow, and other electrically measurable variables, through ON-OFF or PID algorithms with auto tuning.

Download - Controllers selection guide

Selecione a Opção Desejada

Save

(PDF - 0.99 Mb)

  • 8200200130

    N2000 USB Process Controller Input: Universal / Out: pulse, 4-20mA, 4 relays 48x96 mm

  • 8200200130

    N2000 USB Process controller, 4 relays, 48x96 mm

  • 8200200134

    N2000 USB 24V Process controller, 4 relays, 48x96 mm

  • 8200200220

    N2000 USB RS485 Process controller, 4 relays, 48x96 mm

  • 8200200224

    N2000 USB RS485 24V Process controller, 4 relays, 48x96 mm

  • 8830005000

    PT100 STAINLESS STEEL 304 5X30MM CABLE PVC 1,5M 100C

  • 8830016631

    THERMOCOUPLE K HANDLE AND CAB. PVC 2MT W/ CONECTOR MINI, 100C

  • 8806060410

    TxMini-M12-MP (TxMini-M124-20mA + stainless steel case 6x100mm + female conector, 1M cable)

  • 8850000100

    USB port (Mini-B type) panel extension cable 30 cm

  • 8830007700

    PT100 PVC ½ NPT 6X100MM 200C

  • 8830015625

    THERMOCOUPLE J PROBE 6X7MM W / SPRING BAIONET SM CONNECTION CABLE FB+FB+SS BRAIDING INSULATED 2,5M 300C

  • 8806060425

    TxMini-M12-RS485-MP (TxMini-M12-RS485+ stainless steel case 6x100mm + female conector, 1m cable)

  • 8830007750

    PT100 3 STAINLESS STEEL 316 WIRE ½ BSP 6X100MM CABLE 2M PVC 200C

  • 8830007010

    PT100 STAINLESS STEEL 316 6X100MM ½ BSP CAB LARGE 300C

  • 8830007800

    PT100 SILICON 2M ½ BSP STEM 6X100MM, 200C

  • 8830007150

    PT100 STAINLESS STEEL 316 6X150MM ½ BSP CAB LARGE 300C

  • 8830007200

    PT100 STAINLESS STEEL 316 6X100MM ½ NPT CAB LARGE 300C

  • 8830007350

    PT100 STAINLESS STEEL 316 6X300MM ½ BSP CAB LARGE 300C

  • 8830007352

    PT100 STAINLESS STEEL 316 6X300M ½ NPT CAB. LARGE 300C

Related News

  • Looking for a high performance PID controller? We have N2000

    7/6/2021

    N2000 process controller has a universal input that accepts most sensors and signals used in the industry, as well as RS485 serial communication with Modbus RTU protocol.

  • Article - PID Control: Breaking the time barrier

    11/22/2019

    Industry has been using controllers for years. In 1911 the first PID (Proportional - Integral - Derivative) control was created and it is still widely used in automation. In this article, we will present the theory and equation behind each controller action to understand its operation.

Share: