Software to configure transmitters TxConfig

Home » Products » Software Interface » Configurators » Software to Configure Transmitters Txconfig

TxConfig


Software to configure transmitters

TxConfig is easy to use software and its function is to configure NOVUS temperature, humidity/temperature and pressure transmitters.

 

With TxConfig it is possible to configure the type of sensor, user scale, and other parameters. The transmitters are configurable via a USB to serial adapter, such as TxConfig-USB.



Still, unsure? Ask an expert! Make a Suggestion See all models

- Parameters setting
- Serial communication
- Firmware update


        
        
        
        
        
        
4/20/2021

TxConfig Configurator V1.7.7.04

This configurator software is used for configuring transmitter models TxBlock,TxRail, TxIsoBlock, TxIsoRail, TxMiniBlock, TxIsoPack, TxIsoPack-HART, TxIsoRail-HART, RHT-WM RHT-DM, TEMP-WM, TEMP-DM, NP800H (HART) and NP300.

Download - TxConfig Configurator V1.7.7.04

Selecione a Opção Desejada

Save

(ZIP - 1.25 Mb)

  • Temperature Transmitters

  • TEMP-WM & TEMP-DM - HVAC Temperature Transmitter

    The TEMP-WM and TEMP-DM transmitter series incorporate the best high accuracy and great stability temperature sensors. They convert the measured values into linear 4 to 20 mA signals and optional 0 to 10 Vdc output can also be offered under request.


    The microprocessor based circuit enables full configuration of output range when used with the TxConfig PC interface and the Windows® based software.


    The TEMP-WM model is dedicated to wall mounted applications and the TEMP-DM version is suitable for duct and through-the-wall applications.

  • TxIsoPack-USB - Isolated Temperature Transmitter

    TxIsoPack-USB is a fully isolated 4 to 20 mA two-wire loop powered temperature transmitter for in-head assembly.
    Complete sensor type selection and range configuration is achieved by connecting the device directly to a PC USB port thus not requiring any other interface, special converter or any additional driver.
    The isolated and linearized current output represents the sensor input signal according to the temperature sensor selected.

  • TxIsoRail - Isolated Temperature Transmitter

    TxIsoRail is fully programmable isolated temperature transmitters dedicted to Pt100 and thermocouple industrial sensors. TxIsoRail is a DIN rail mount unit. Both units can be easily user configured for input type and working range by means of an interface cable connected to a PC USB port.


    Why use isolated transmitters?
    Isolated transmitters protect the electrical instruments by eliminating ground loop effects and reduce substantially the undesirable interferences and instabilities in sensor measurements.

  • TxMiniBlock - Head Mount Temperature Transmitter

    TxMiniBlock is a cost-effective programmable RTD temperature transmitter for head mounting. With a unique microprocessor based technology it features full PC configuration of range and calibration which is achieved by means of a convenient interface cable connected to a USB port from a PC. Working range, output calibration and protection can be easily set by using the TxConfig Windows configurator software. This transmitter is specially convenient for being mounted in small inexpensive heads.

     

  • Humidity & Temperature

  • RHT-WM and RHT-DM - Humidity and Temperature Transmitters

    The RHT-WM and RHT-DM transmitter series incorporate the best high accuracy and great stability relative humidity and temperature sensors. They convert the measured values into linear 4 to 20 mA signals. The microprocessor based circuit enables full configuration of output range when used with the TxConfig PC interface and the Windows® based software.


    The humidity signal can be configured to either relative humidity or dew point output. The RHT-WM model is dedicated to wall mounted applications and the RHT-DM version is suitable for duct and through-the-wall applications.

  • 8816021059

    Configuration Interface TxConfig-HRT

  • 8816021039

    TxConfig USB (configurator software + interface USB)

Related News

Share: