Isolated Temperature Transmitter TxIsoPack-USB

Home » Products » Sensing, Conditioning & Transmitters » Temperature Transmitters » Isolated Temperature Transmitter Txisopack-usb

Conflict Mineral Free


Isolated Temperature Transmitter

TxIsoPack-USB is a fully isolated 4 to 20 mA two-wire loop powered temperature transmitter for in-head assembly.
Complete sensor type selection and range configuration is achieved by connecting the device directly to a PC USB port thus not requiring any other interface, special converter or any additional driver.
The isolated and linearized current output represents the sensor input signal according to the temperature sensor selected.

Still, unsure? Ask an expert! Make a Suggestion See all models

- Input Sensor: configurable
- Pt100: 2, 3 or 4-wire, 0.170 mA excitation current, Alpha = 0.00385 according to IEC 751(NBR 13773)
- Voltage: 0 to 50 mVdc. Impedance > 1 MΩ
- Total Accuracy: maximum error of 0.3 % of maximum range for thermocouples; 0.2 % of maximum range for Pt100 and voltage
- Response Time: ≤500 ms
- Isolation: 1000 Vac for 1 minute between input and output
- Output: 4-20 mA current or 20-4 mA, two-wire type; linear in respect to the measured temperature
- Output Resolution: 0.004 mA (12 bits)
- Power: 12 to 35 Vdc, voltage over the transmitter
- Maximum Load in series: RL= (Vdc – 12) / 0.02 Ω where Vdc is the power voltage
- Operating Temperature: -20 to 75 °C
- Relative Humidity: 0 to 90 % RH
- Eletromagnetic Compatibility: EN 50081-2, EN 50082-2
- Internal protection against reversed power voltage polarity
- Internal cold junction compensation for thermocouples
- ABS enclosure, 44 mm diameter and 24 mm maximum height
- Communication cable: mini-B USB cable, 5 pins




Flyer TxIsoPack - English

Download - Flyer TxIsoPack - English

Selecione a Opção Desejada


(PDF - 0.64 Mb)


Flyer Temperature Transmitters

Get to know the characteristics and technical specifications of our temperature transmitters.

Download - Flyer Temperature Transmitters

Selecione a Opção Desejada


(PDF - 2.03 Mb)


Operating Manual TxIsoPack

Download - Operating Manual TxIsoPack

Selecione a Opção Desejada


(PDF - 1.39 Mb)


Selection Guide - Temperature Transmitters

Get to know our Temperature Transmitters, compare its features and choose the most suitable for your needs.

Download - Selection Guide - Temperature Transmitters

Selecione a Opção Desejada


(PDF - 1.30 Mb)


CE - D.O.C. TxIsoPack - USB

CE Declaration of Conformidity.

Download - CE - D.O.C. TxIsoPack - USB

Selecione a Opção Desejada


(PDF - 0.09 Mb)

  • TxConfig - Software to configure transmitters

    TxConfig is easy to use software and its function is to configure NOVUS temperature, humidity/temperature and pressure transmitters.


    With TxConfig it is possible to configure the type of sensor, user scale, and other parameters. The transmitters are configurable via a USB to serial adapter, such as TxConfig-USB.

    4/20/2021 - TxConfig Configurator V1.7.7.04

  • 8807000000

    TxIsoPack USB isolated head mount temp. transmit. 4-20mA out