TEMP-WM & TEMP-DM - HVAC Temperature Transmitter

» » » » Temp-wm & Temp-dm - Hvac Temperature Transmitter
Conflict Mineral Free

TEMP-WM & TEMP-DM


HVAC Temperature Transmitter

The TEMP-WM and TEMP-DM transmitter series incorporate the best high accuracy and great stability temperature sensors. They convert the measured values into linear 4 to 20 mA signals and optional 0 to 10 Vdc output can also be offered under request.


The microprocessor based circuit enables full configuration of output range when used with the TxConfig PC interface and the Windows® based software.


The TEMP-WM model is dedicated to wall mounted applications and the TEMP-DM version is suitable for duct and through-the-wall applications.



Still, unsure? Ask an expert! Make a Suggestion See all models
- Power
  12 to 30 Vdc (model 4-20 mA)
  18 to 30 Vdc (model 0-10 V)
- Cable input: PG7 cable gland
  Output
  Two-wire loop powered 4-20 mA or 20-4 mA
  Voltage output: 0-10 Vdc or 10-0 Vdc (optional)
- Output resolution
  0,006 mA (4-20 mA)
  0,003 V (0-10 Vcc)
- Output load (RL)
  Model 4-20 mA: RL (max. in Ohms) = (Vdc - 12) / 0.02; where: Vdc=power voltage in Volts
  Model 0-10 Vdc: 10 kOhms minimum
- Ingress Protection
- Electronic module case: IP65
- Sensor probe: IP40
- Internal protection against reversed voltage wire polarity
- No electrical isolation between input, output and power circuits
 

 


        
        
        
        
5/29/2019

Operating Manual TEMP WM-DM

Download - Operating Manual TEMP WM-DM

Selecione a Opção Desejada

Save

(PDF - 0.83 Mb)

3/16/2009

Flyer TEMP WM-DM

Download - Flyer TEMP WM-DM

Selecione a Opção Desejada

Save

(PDF - 0.61 Mb)

8/27/2013

CE - D.O.C. Temp-WM & Temp-DM

CE - D.O.C. Temp-WM & Temp-DM

Download - CE - D.O.C. Temp-WM & Temp-DM

Selecione a Opção Desejada

Save

(PDF - 0.09 Mb)

  • TxConfig - Software to configure transmitters

    TxConfig is easy to use software and its function is to configure NOVUS temperature, humidity/temperature and pressure transmitters.

     

    With TxConfig it is possible to configure the type of sensor, user scale, and other parameters. The transmitters are configurable via a USB to serial adapter, such as TxConfig-USB.

    4/20/2021 - TxConfig Configurator V1.7.7.04 (Attachment)

  • 8803809706

    Temp-WM Wall Mount temperature transmitter, 4-20mA out

  • 8803819706

    Temp-DM Duct Mount temp. transmitter 150mm probe, 4-20mA out

  • 8803819780

    Temp-DM Duct Mount temp. transmit. 150mm probe, 0-10Vdc out

  • 8803829706

    Temp-DM Duct Mount temp. transmit. 250mm probe, 4-20mA out

  • 8803829780

    Temp-DM Duct Mount temp. transmit. 250mm probe, 0-10Vdc out

Share: