Cookies are not enabled in your browser and may affect website resources. We recommend that you turn it on.
RHT Climate is our new Temperature and Relative Humidity product family that is being launched to the market, meeting the most demanding applications in terms of accuracy, versatility and psychrometric information.
Equipped with one of the most accurate sensors on the market, its measured variables can be retransmitted through two analogue outputs, which can be configured by software to either current (4-20mA) or voltage (0-10V). Besides that, the output can be read by Modbus RTU through RS-485. The transmitter also has two digital outputs and a buzzer that can be used as alarms with a configurable set point. The parameters can be adjusted through the built-in HMI or by a simple USB cable using our free configuration software. The free software also allows you to save the desired configuration for future use.
"Comparing to our older RHT transmitters, the new RHT Climate family has technological advances that put it in a completely different level. The relative humidity and temperature sensors are much more accurate and can be used in an even greater temperature range.”, explains Fabio Piuma, NOVUS’ product manager. "It also allows easy commissioning and troubleshooting by forcing its output values to a determined level.”
The RHT Climate family is available in wall mount or duct mount versions. All models come with a built-in temperature and relative humidity probe.
The start of activities at the new headquarters was postponed to September.
Launched by NOVUS on July 17, LogBox 3G is an IoT device for remote and mobile monitoring with full data access via 3G or 2G cellular network. It has backup security memory, ensuring complete data integrity in case of cell coverage failures. The device has two universal analog inputs capable of accepting a wide range of sensors. It also has some internal sensors for measuring the temperature, battery voltage and external source.
The DigiGate Profibus is a gateway for connecting a Profibus DP network and a Modbus RTU network. It is a cost-effective solution on the market to search factory floor data, generally used by instruments in Modbus networks, for the level of control in Profibus DP. The gateway treats the networks separately, because they are different speeds, functioning as a master in the Modbus network and slave in the Profibus network.
With more than 5 thousand square meters of constructed area, where three thousand are for the factory, the new building is almost triple the current space, and has the possibility of expansion in another 6 thousand square meters.
The TagTemp portable data loggers have been developed to monitor temperature sensitive products during transportation and storage, continuously recording the temperature and signaling any changes. It is Available in different models with either external or internal temperature sensor, versatile and designed for various applications.