Temperature Transmitter - TxIsoPack-USB

» » » Temperature Transmitter - Txisopack-usb
  • Visualizar imagens do produto Temperature Transmitter - TxIsoPack-USB

TxIsoPack-USB is a fully isolated 4 to 20 mA two-wire loop powered temperature transmitter  for in-head assembly.
Complete sensor type selection and range configuration is achieved by connecting  the device directly to a PC USB port thus not requiring any other interface, special converter or any additional driver.
The isolated and linearized current output represents the sensor input signal according to the temperature sensor selected.

• Input Sensor: configurable
• Pt100: 2, 3 or 4-wire,  0.170 mA excitation current, Alpha = 0.00385 according to IEC 751(NBR 13773)
• Voltage: 0 to 50 mVdc. Impedance > 1 MΩ
• Total Accuracy: maximum error of 0.3 % of maximum range for thermocouples; 0.2 % of maximum range for  Pt100 and voltage
• Response Time: ≤500 ms
• Isolation: 1000 Vac for 1 minute between input and output
• Output: 4-20 mA current  or 20-4 mA, two-wire type; linear in respect to the measured temperature
• Output Resolution: 0.004 mA (12 bits)
• Power: 12 to 35 Vdc, voltage over the transmitter
• Maximum Load in series:        RL= (Vdc – 12) / 0.02 Ω where Vdc is the power voltage
• Operating Temperature: -20 to  75 °C
• Relative Humidity: 0 to 90 % RH
• Eletromagnetic Compatibility: EN 50081-2, EN 50082-2
• Internal protection against reversed power voltage polarity
• Internal cold junction compensation for thermocouples
• ABS enclosure, 44 mm diameter   and 24 mm maximum height
• Communication cable: mini-B USB cable, 5 pins
  • 8807000000

    TxIsoPack USB isolated head mount temp. transmit. 4-20mA out

  • 8807000000M

    TxIsoPack USB 4-20 mA out - Pack with 80 units.

  • Downloads

  • Videos and Tutorials

7/27/2010

Flyer TxIsoPack - English

Download - Flyer TxIsoPack - English

Selecione a Opção Desejada

Save

(PDF - 0.64 Mb)

2/6/2018

Operating Manual TxIsoPack

Download - Operating Manual TxIsoPack

Selecione a Opção Desejada

Save

(PDF - 0.50 Mb)

3/22/2017

TxConfig Configurator V1.7.7.03

This configurator software is used for configuring transmitter models TxBlock,TxRail, TxIsoBlock, TxIsoRail, TxMiniBlock, TxIsoPack, TxIsoPack-HART, TxIsoRail-HART, RHT-WM RHT-DM, TEMP-WM, TEMP-DM, NP800H (HART) and NP300.

Download - TxConfig Configurator V1.7.7.03

Selecione a Opção Desejada

Save

(ZIP - 1.24 Mb)

8/27/2013

CE - D.O.C. TxIsoPack - USB

CE Declaration of Conformidity.

Download - CE - D.O.C. TxIsoPack - USB

Selecione a Opção Desejada

Save

(PDF - 0.09 Mb)

2/20/2018

Configurators Guide

Download - Configurators Guide

Selecione a Opção Desejada

Save

(PDF - 3.22 Mb)