N2000 - Universal Controller

» » » N2000 - Universal Controller
  • Visualizar imagens do produto N2000
  • Visualizar imagens do produto N2000

The N2000 Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.
With a sophisticated and consistent software and its advanced truly universal circuitry, the N2000 accepts configuration of  both input signal and control output through the front keyboard without any internal hardware change.
Power supply for remote loop powered transmitters is standard and is a must for high-end applications.
From the very simple applications as a temperature controller to the most complex systems of distributed control with PLC’s or SCADA networks, the N2000 is the right answer to your needs for industrial or laboratory automation.
The N2000S is specific for applications in controlling servo motorized valves, servo actuators and dampers by means of two time proportional relays.

• Accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc
• Double LED display: red for PV and green for SV
• Dual SPST 3 A / 250 Vac relays and dual SPDT 5 A / 250 Vac relays can be individually programmed for control or alarm
• Isolated 4-20 mA output with 1500-level resolution, maximum 550 ohm load for control or PV / SV retransmission. It can also be configured for digital input or output (10 Vdc / 20 mA)
• Sampling rate: 4 measurements per second
• One digital input for dry contact with 5 programmable functions
• Remote setpoint input for 4-20 mAdc signal (N2000)
• 24 Vdc / 30 mA supply output for remote transmitter excitation
• RS485 comm with Modbus RTU protocol (optional)
• Auto tuning PID control
• Auto/Manual mode, bumpless transfer
• Programmable Soft start up to 9999 seconds
• Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments
• Measured value resolution: 12,000 levels
• Control output update: 250 ms
• Up to four configurable relays, two timer alarms
• Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event
• Alarm initial blocking function
• Power: 100 to 240 Vac/dc, 50/60 Hz; optional 24 Vdc/ac
• Maximum consumption: 4 VA
• Circuitry can be removed from the front panel
• Operating environment: 0 to 55 ºC, 20 to 90 % RH
• Front panel: IP65, Polycarbonate UL94 V-2
• Back panel: IP30, ABS + PC UL94 V-0
• Dim ensions: 48 x 96 x 92 mm, 1/8 DIN
• Panel cutout: 45.5 x 93 mm
• Weight: 240 g (265 g with options)

        
        
        
        
        
  • 8200200130

    N2000 USB Process Controller Input: Universal / Out: pulse, 4-20mA, 4 relays 48x96 mm

  • 8200200130

    N2000 USB Process controller, 4 relays, 48x96 mm

  • 8200200130M

    N2000 USB - Pack with 80 units.

  • 8200200134

    N2000 USB 24V Process controller, 4 relays, 48x96 mm

  • 8200200220

    N2000 USB RS485 Process controller, 4 relays, 48x96 mm

  • 8200200224

    N2000 USB RS485 24V Process controller, 4 relays, 48x96 mm

  • 8850000100

    USB port (Mini-B type) panel extension cable 30 cm

  • Downloads

1/5/2006

Universal Process Controller N2000 & N2000S - Flyer

Read more about the Universal Process Controller N2000 & N2000S

Download - Universal Process Controller N2000 & N2000S - Flyer

Selecione a Opção Desejada

Save

(PDF - 0.11 Mb)

3/13/2018

Operating Manual N2000 (USB)

Download - Operating Manual N2000 (USB)

Selecione a Opção Desejada

Save

(PDF - 0.78 Mb)

3/2/2017

N1100, N2000 and N3000 Registers Table for MODBUS communication

Download - N1100, N2000 and N3000 Registers Table for MODBUS communication

Selecione a Opção Desejada

Save

(PDF - 0.09 Mb)

11/8/2003

MODBUS Protocol Documentation

Download - MODBUS Protocol Documentation

Selecione a Opção Desejada

Save

(PDF - 0.18 Mb)

9/18/2019

NConfig Configurator V1.4.2.02

Configuration software.

Download - NConfig Configurator V1.4.2.02

Selecione a Opção Desejada

Save

(ZIP - 11.30 Mb)

7/12/2005

CE - D.O.C. N2000 & N2000S

CE Declaration of Conformidity.

Download - CE - D.O.C. N2000 & N2000S

Selecione a Opção Desejada

Save

(PDF - 0.05 Mb)

7/21/2014

2D Housing Drawing - N2000

Download - 2D Housing Drawing - N2000

Selecione a Opção Desejada

Save

(ZIP - 0.40 Mb)

7/16/2019

Novus Controllers - controllers selection guide

Wide range of industrial process controllers, such as temperature control, humidity, pressure, flow, and other electrically measurable variables, through ON-OFF or PID algorithms with auto tuning.

Download - Novus Controllers - controllers selection guide

Selecione a Opção Desejada

Save

(PDF - 0.75 Mb)

Related News

  • PID Control: Breaking the time barrier

    11/22/2019

    Industry has been using controllers for years. In 1911 the first PID (Proportional - Integral - Derivative) control was created and it is still widely used in automation. In this article, we will present the theory and equation behind each controller action to understand its operation.

Compartilhar:

NOVUS Global Privacy Notice

NOVUS is committed to protect the privacy and security of your personal information. The data that you share with NOVUS allows us to provide a better experience when you use our products and services. We guarantee total privacy to your data, used exclusively for communications between NOVUS and you.

In this statement we affirm:

  1. NOVUS does not sell or negotiate customer information;
  2. Your data are stored in secure and controlled environment;
  3. We use your data only for communications of your interest;
  4. At any time you may opt out of the list;

Please see our complete Privacy Policy

After read our Privacy Policy, chose the option bellow: